Three milling head CNC screw milling machine

WRITER：　SOURCE：　DATE：2020/05/31 18:15:22

Lxk100 CNC three milling head milling machine introduction:

The milling part is composed of three rotatable milling heads. The milling head can adjust the angle and disassemble, which can meet the processing requirements of different workpieces. Three grooves can be machined at 120 ° by three milling heads, and two grooves can be machined at 180 ° by two milling heads. The front and rear ends of the equipment shall be equipped with at least 2 meters of material receiving and feeding guide frame to achieve the purpose of continuous processing.

Machining efficiency: take 73 outer diameter, 240 pitch three head screw 2-4mm deep, pipe body dz50, joint 42CrMo, hardness 28-32hrb as an example, the maximum speed of milling 10 three screws per meter is not more than 5 minutes.